- Manufacturers Instructions Should Be Read And Understood Prior
To Any Installation With Installation Overseen By A Competent Person
As Set Forth In 29 CFR 1926.450 (B)
- Adjust
- IT ™
Wall Bracing Is Designed To Be Used In Accordance With Industry Standards
As Set Forth In The " Standards For Bracing Masonry Walls Under
Construction" "Wall Bracing Handbook" And Applicable
Local,State And/Or Federal OSHA Standards.
- When Using Any Bracing System,We Recommend That Walls Under
Construction That Have Experienced A Wind Load Event In Excess Of 40MPH
Be Inspected Before Construction
Proceeds.
- We Recommend That Footers For Adjust-IT Back-To-Back Wall Bracing
Jacks Follow Mud-Sill Standards As Defined In 29 CFR 1926.450 (B) &
1926.451 (C)(2)(iii)
- OSHA Standards For Limited Access Zone/Restricted Zone As
Set For In 29 CFR 1926.706 Must Be Adhered To.
- Standard Personal Protective Equipment ( PPE ) Should Always Be Used
When Working With Adjust
- IT ™
Wall Bracing : Gloves,Hard-Hat,Safety Shoes & Any Other PPE Deemed
To Be Appropiate For Individual Applications.
|
